原链接：http://blog.pcwuyu.com/2015/575.html

原分类：Linux

-- To make configuration changes that persists between (nightly) releases,
-- copy defaults.lua to defaults.persistent.lua and make the changes there.

-- number of page turns between full screen refresh (elink屏每隔多少页完全刷新一次,)
-- default to do a full refresh on every 6 page turns (默认=6,参数范围 1-99)
-- 影响格式 = 全部
DRCOUNTMAX = 15

-- number of pages for hinting (在后台预先加载页数)
-- default to pre-rendering 1 page
-- 影响格式 = PDF/DJVU
DHINTCOUNT = 2

-- full screen mode, 1 for true, 0 for false (显示/隐藏进度指示条,1=显示,0=隐藏)
-- 影响格式 = PDF/DJVU
DFULL_SCREEN = 1

-- scroll mode, 1 for true, 0 for false (是否以连续模式显示页面)
-- 影响格式 = PDF/DJVU
DSCROLL_MODE = 1

-- default gamma setting (默认伽玛设置)
DGLOBALGAMMA = 1.0

-- DjVu page rendering mode (used in djvu.c:drawPage())
-- See comments in djvureader.lua:DJVUReader:select_render_mode()
DRENDER_MODE = 0 -- 0 is COLOUR

-- minimum cache size
DGLOBAL_CACHE_SIZE_MINIMUM = 1024102410

-- proportion of system free memory used as global cache
DGLOBAL_CACHE_FREE_PROPORTION = 0.2

-- maximum cache size
DGLOBAL_CACHE_SIZE_MAXIMUM = 1024102430

-- background colour in non scroll mode: 8 = gray, 0 = white, 15 = black
DBACKGROUND_COLOR = 0

-- outer page colour in scroll mode: 8 = gray, 0 = white, 15 = black
DOUTER_PAGE_COLOR = 0

-- supported view mode includes: "scroll" and "page" (pagination in "page" mode, no pagination in "scroll" mode)
-- 影响格式 = EPUB/FB2
DCREREADER_VIEW_MODE = "page"

-- show dimmed area to indicate page overlap in "page" view mode, (是否以灰色标识当前页与上一页的重叠区域)
-- default to false (缺省 = )
-- 影响格式 = PDF/DJVU
DSHOWOVERLAP = true

-- show hidden files in filemanager (是否显示隐藏文件 (以"."开头的文件))
-- default to false (缺省 = )
-- 影响格式 = FileManager
DSHOWHIDDENFILES = false

-- 是否显示文件大小，单位为MB
-- 影响格式 = FileManager
DSHOWFILESIZE = true

-- landscape clockwise rotation
-- default to true, set to false for counterclockwise rotation
DLANDSCAPE_CLOCKWISE_ROTATION = true

-- default minimum screen height for reading with 2 pages in landscape mode
DCREREADER_TWO_PAGE_THRESHOLD = 7

-- page overlap pixels
DOVERLAPPIXELS = 30

-- timeout to show link rectangle around links
-- default to 0.5 second
-- set to 0 to disable showing rectangle and follow link immediately
FOLLOW_LINK_TIMEOUT = 0.5

-- customizable tap zones(rectangles)
-- x: x coordinate of top left corner in proportion of screen width
-- y: y coordinate of top left corner in proportion of screen height
-- w: width of tap zone in proportion of screen width
-- h: height of tap zone in proportion of screen height
DTAP_ZONE_MENU = {x = 1/8, y = 0, w = 3/4, h = 1/4}
DTAP_ZONE_CONFIG = {x = 0, y = 0, w = 0, h = 0}
DTAP_ZONE_MINIBAR = {x = 0, y = 15/16, w = 1, h = 1/16}
DTAP_ZONE_FORWARD = {x = 1/4, y = 0, w = 3/4, h = 1}
DTAP_ZONE_BACKWARD = {x = 0, y = 0, w = 1/4, h = 1}
DTAP_ZONE_BOOKMARK = {x = 7/8, y = 0, w = 1/8, h = 1/8}
DTAP_ZONE_FLIPPING = {x = 0, y = 0, w = 1/8, h = 1/8}
DDOUBLE_TAP_ZONE_NEXT_CHAPTER = {x = 6/8, y = 0, w = 2/8, h = 2/8}
DDOUBLE_TAP_ZONE_PREV_CHAPTER = {x = 0, y = 0, w = 2/8, h = 2/8}

-- behaviour of swipes
DCHANGE_WEST_SWIPE_TO_EAST = true
DCHANGE_EAST_SWIPE_TO_WEST = true

-- koptreader config defaults
DKOPTREADER_CONFIG_FONT_SIZE = 1.0 -- range from 0.1 to 3.0
DKOPTREADER_CONFIG_TEXT_WRAP = 0 -- 1 = on, 0 = off
DKOPTREADER_CONFIG_TRIM_PAGE = 1 -- 1 = auto, 0 = manual
DKOPTREADER_CONFIG_DETECT_INDENT = 1 -- 1 = enable, 0 = disable
DKOPTREADER_CONFIG_DEFECT_SIZE = 1.0 -- range from 0.0 to 3.0
DKOPTREADER_CONFIG_PAGE_MARGIN = 0.10 -- range from 0.0 to 1.0
DKOPTREADER_CONFIG_LINE_SPACING = 1.2 -- range from 0.5 to 2.0
DKOPTREADER_CONFIG_RENDER_QUALITY = 1.0 -- range from 0.5 to 2.0
DKOPTREADER_CONFIG_AUTO_STRAIGHTEN = 0 -- range from 0 to 10
DKOPTREADER_CONFIG_JUSTIFICATION = 3 -- -1 = auto, 0 = left, 1 = center, 2 = right, 3 = full
DKOPTREADER_CONFIG_MAX_COLUMNS = 2 -- range from 1 to 4
DKOPTREADER_CONFIG_CONTRAST = 1.0 -- range from 0.2 to 2.0

-- word spacing for reflow
DKOPTREADER_CONFIG_WORD_SPACINGS = {0.05, -0.2, 0.375} -- range from (+/-)0.05 to (+/-)0.5
DKOPTREADER_CONFIG_DEFAULT_WORD_SPACING = -0.2 -- range from (+/-)0.05 to (+/-)0.5
-- document languages for OCR
DKOPTREADER_CONFIG_DOC_LANGS_TEXT = {"English", "Chinese"}
DKOPTREADER_CONFIG_DOC_LANGS_CODE = {"eng", "chi_sim"} -- language code, make sure you have corresponding training data
DKOPTREADER_CONFIG_DOC_DEFAULT_LANG_CODE = "eng" -- that have filenames starting with the language codes

-- crereader font sizes
-- feel free to add more entries in this list
DCREREADER_CONFIG_FONT_SIZES = {16, 20, 22, 24, 26, 28, 30, 34, 38, 44} -- option range from 16 to 44
-- default font size (默认字体大小,参数范围 16 - 44)
-- 影响格式 = EPUB/FB2
DCREREADER_CONFIG_DEFAULT_FONT_SIZE = 22

-- crereader margin sizes (页面边距)
-- margin {left, top, right, bottom} in pixels (页面边距 {左, 上, 右, 下}，单位为像素,参数范围 5 - 50)
-- 影响格式 = EPUB/FB2
DCREREADER_CONFIG_MARGIN_SIZES_SMALL = {5, 10, 5, 10}
DCREREADER_CONFIG_MARGIN_SIZES_MEDIUM = {10, 15, 10, 15}
DCREREADER_CONFIG_MARGIN_SIZES_LARGE = {20, 20, 20, 20}

-- crereader font gamma
DCREREADER_CONFIG_LIGHTER_FONT_GAMMA = 10
DCREREADER_CONFIG_DEFAULT_FONT_GAMMA = 15
DCREREADER_CONFIG_DARKER_FONT_GAMMA = 25

-- crereader line space percentage
DCREREADER_CONFIG_LINE_SPACE_PERCENT_SMALL = 90
DCREREADER_CONFIG_LINE_SPACE_PERCENT_MEDIUM = 100
DCREREADER_CONFIG_LINE_SPACE_PERCENT_LARGE = 120

-- crereader progress bar (进度条样式)
-- 0 for top "full" progress bar (0为完整)
-- 1 for bottom "mini" progress bar (1为迷你)
-- 影响格式 = EPUB/FB2
DCREREADER_PROGRESS_BAR = 1

-- configure "mini" progress bar
DMINIBAR_ALL_AT_ONCE = false
DMINIBAR_PROGRESSBAR = true
DMINIBAR_TIME = true
DMINIBAR_PAGES = true
DMINIBAR_NEXT_CHAPTER = true
DMINIBAR_BATTERY = true

DMINIBAR_PROGRESS_MARKER = true -- Black notch for each TOC entry
DMINIBAR_TOC_MARKER_WIDTH = 2 -- Looses usefulness > 3

DMINIBAR_HEIGHT = 7 -- Should be smaller than DMINIBAR_CONTAINER_HEIGHT
DMINIBAR_CONTAINER_HEIGHT = 14 -- Larger means more padding at the bottom, at the risk of eating into the last line

DMINIBAR_FONT_SIZE = 14

-- gesture detector defaults
DGESDETECT_DISABLE_DOUBLE_TAP = true

-- change this to any numerical value if you want to antomatically save settings when turning pages
DAUTO_SAVE_PAGING_COUNT = nil

-- dictionary font size
DDICT_FONT_SIZE = 20

-- Frontlight decrease of sensitivity for two-fingered pan gesture,
-- e.g. 2 changes the sensitivity by 1/2, 3 by 1/3 etc.
FRONTLIGHT_SENSITIVITY_DECREASE = 2

-- Normally, Koreader will present file lists sorted in case insensitive manner
-- when presenting an alphatically sorted list. So the Order is "A, b, C, d".
-- You can switch to a case sensitive sort ("A", "C", "b", "d") by disabling
-- insensitive sort
DALPHA_SORT_CASE_INSENSITIVE = true

-- Set a path to a folder that is filled by Calibre (must contain the file metadata.calibre)
-- e.g.
-- "/mnt/sd/.hidden" for Kobo with files in ".hidden" on the SD card
-- "/mnt/onboard/MyPath" for Kobo with files in "MyPath" on the device itself
-- "/mnt/us/documents/" for Kindle files in folder "documents"
SEARCH_LIBRARY_PATH = ""
SEARCH_LIBRARY_PATH2 = ""

-- Search parameters
SEARCH_CASESENSITIVE = false

SEARCH_AUTHORS = true
SEARCH_TITLE = true
SEARCH_TAGS = true
SEARCH_SERIES = true
SEARCH_PATH = true

-- Light parameter for Kobo
KOBO_LIGHT_ON_START = -1 -- -1 or 0-100. -1 leaves light as it is, other sets light on start/wake up
KOBO_SCREEN_SAVER = "" -- image or directory with pictures or "-"
KOBO_SCREEN_SAVER_LAST_BOOK = true -- get screensaver from last book if possible

-- Network proxy settings
-- proxy url should be a string in the format of "http://localhost:3128"
-- proxy authentication is not supported yet.
NETWORK_PROXY = nil

-- ####################################################################
-- following features are not supported right now
-- ####################################################################

-- set panning distance
--DSHIFT_X = 100
--DSHIFT_Y = 50

-- step to change zoom manually, default = 16%
--DSTEP_MANUAL_ZOOM = 16
--DPAN_BY_PAGE = false -- using shift_[xy] or width/height
--DPAN_MARGIN = 5 -- horizontal margin for two-column zoom (in pixels)
--DPAN_OVERLAP_VERTICAL = 30

-- tile cache configuration:
--DCACHE_MAX_MEMSIZE = 102410245 -- 5MB tile cache
--DCACHE_MAX_TTL = 20 -- time to live

-- renderer cache size
--DCACHE_DOCUMENT_SIZE = 102410248 -- FIXME random, needs testing

-- default value for battery level logging
--DBATTERY_LOGGING = false

-- delay for info messages in ms
--DINFO_NODELAY=0
--DINFO_DELAY=1500

-- toggle defaults
--DUNIREADER_SHOW_OVERLAP_ENABLE = true
--DUNIREADER_SHOW_LINKS_ENABLE = true
--DUNIREADER_COMICS_MODE_ENABLE = true
--DUNIREADER_RTL_MODE_ENABLE = false
--DUNIREADER_PAGE_MODE_ENABLE = false

--DDJVUREADER_SHOW_OVERLAP_ENABLE = true
--DDJVUREADER_SHOW_LINKS_ENABLE = false
--DDJVUREADER_COMICS_MODE_ENABLE = true
--DDJVUREADER_RTL_MODE_ENABLE = false
--DDJVUREADER_PAGE_MODE_ENABLE = false

--DKOPTREADER_SHOW_OVERLAP_ENABLE = true
--DKOPTREADER_SHOW_LINKS_ENABLE = false
--DKOPTREADER_COMICS_MODE_ENABLE = false
--DKOPTREADER_RTL_MODE_ENABLE = false
--DKOPTREADER_PAGE_MODE_ENABLE = false

--DPICVIEWER_SHOW_OVERLAP_ENABLE = false
--DPICVIEWER_SHOW_LINKS_ENABLE = false
--DPICVIEWER_COMICS_MODE_ENABLE = true
--DPICVIEWER_RTL_MODE_ENABLE = false
--DPICVIEWER_PAGE_MODE_ENABLE = false

--DKOPTREADER_CONFIG_MULTI_THREADS = 1 -- 1 = on, 0 = off
--DKOPTREADER_CONFIG_SCREEN_ROTATION = 0 -- 0, 90, 180, 270 degrees